عرض مشاركة واحدة
قديم 01-05-2012, 06:25 PM   #6
فريكر
:: سيسكو مميز ::
 
الصورة الرمزية فريكر
 
تاريخ التسجيل: Jan 2011
المشاركات: 366
شكراً: 11
تم شكره 99 مرة في 42 مشاركة
فريكر will become famous soon enough
إرسال رسالة عبر مراسل MSN إلى فريكر
افتراضي رد: لابات حلها تضمن شهادة ccna

حل المجموعة الثالثة WAN Technology
NA-3-1-PPP-PAP.pka
NA-3-2-PPP-CHAP.pka
NA-3-3-FR-Multipoint.pka
NA-3-4-FR-P2P.pka

كود:
<<Answer for LAB 3-1: PPP-PAP>>

[On Ranet  BR1 (via console)] :
(Go to Desktop Tab > Terminal)
Ranet-BR1>en
Ranet-BR1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Ranet-BR1(config)#int fa0/0
Ranet-BR1(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Ranet-BR1(config-if)#ip add 192.168.0.62 255.255.255.224
Ranet-BR1(config-if)#int s0/0/0
Ranet-BR1(config-if)#no sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
Ranet-BR1(config-if)#ip add 192.168.0.225 255.255.255.252
Ranet-BR1(config-if)#encapsulation ppp
Ranet-BR1(config-if)#ppp authentication pap
Ranet-BR1(config-if)#ppp pap sent-username ranetpapuser password ranetpappass
Ranet-BR1(config-if)#exit
Ranet-BR1(config)#username ranetpapuser password ranetpappass
Ranet-BR1(config)#
Ranet-BR1#
%SYS-5-CONFIG_I: Configured from console by console
Ranet-BR1#copy run start
Destination filename [startup-config]? 
Building configuration...
[OK]
Ranet-BR1#

[On Ranet BR2 (via console)] :
(Go to Desktop Tab > Terminal)
Ranet-BR2>en
Ranet-BR2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Ranet-BR2(config)#int fa0/0
Ranet-BR2(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Ranet-BR2(config-if)#ip add 192.168.0.78 255.255.255.240
Ranet-BR2(config-if)#int s0/0/0
Ranet-BR2(config-if)#no sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
Ranet-BR2(config-if)#clock rate 64000
Ranet-BR2(config-if)#ip add 192.168.0.226 255.255.255.252
Ranet-BR2(config-if)#encapsulation ppp
Ranet-BR2(config-if)#ppp authentication pap
Ranet-BR2(config-if)#ppp pap sent-username ranetpapuser password ranetpappass
Ranet-BR2(config-if)#exit
Ranet-BR2(config)#username ranetpapuser password ranetpappass
Ranet-BR2(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Ranet-BR2(config)#
Ranet-BR2#
%SYS-5-CONFIG_I: Configured from console by console
Ranet-BR2#copy run start
Destination filename [startup-config]? 
Building configuration...
[OK]
Ranet-BR2#

[On Host1] :
(Go to Desktop Tab > Command Prompt)
Packet Tracer PC Command Line 1.0
PC>ping 192.168.0.70

Pinging 192.168.0.70 with 32 bytes of data:

Reply from 192.168.0.70: bytes=32 time=13ms TTL=126
Reply from 192.168.0.70: bytes=32 time=13ms TTL=126
Reply from 192.168.0.70: bytes=32 time=11ms TTL=126
Reply from 192.168.0.70: bytes=32 time=11ms TTL=126

Ping statistics for 192.168.0.70:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 11ms, Maximum = 13ms, Average = 12ms

PC>
كود:
<<Answer for LAB 3-2: PPP-CHAP>>

[On Ranet  BR1 (via console)] :
(Go to Desktop Tab > Terminal)
Ranet-BR1>en
Ranet-BR1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Ranet-BR1(config)#int fa0/0
Ranet-BR1(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Ranet-BR1(config-if)#ip add 172.20.1.206 255.255.255.240
Ranet-BR1(config-if)#int s0/0/0
Ranet-BR1(config-if)#no sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
Ranet-BR1(config-if)#ip add 172.20.1.233 255.255.255.248
Ranet-BR1(config-if)#encapsulation ppp
Ranet-BR1(config-if)#ppp authentication chap
Ranet-BR1(config-if)#exit
Ranet-BR1(config)#username Ranet-BR2
Ranet-BR1(config)#
Ranet-BR1#
%SYS-5-CONFIG_I: Configured from console by console
Ranet-BR1#copy run start
Destination filename [startup-config]? 
Building configuration...
[OK]
Ranet-BR1#

[On Ranet  BR2 (via console)] :
(Go to Desktop Tab > Terminal)
Ranet-BR2>en
Ranet-BR2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Ranet-BR2(config)#int fa0/0
Ranet-BR2(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Ranet-BR2(config-if)#ip add 172.20.1.230 255.255.255.248
Ranet-BR2(config-if)#int s0/0/0
Ranet-BR2(config-if)#no sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
Ranet-BR2(config-if)#clock rate 64000
Ranet-BR2(config-if)#ip add 172.20.1.234 255.255.255.248
Ranet-BR2(config-if)#encapsulation ppp
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Ranet-BR2(config-if)#ppp authentication chap

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Ranet-BR2(config-if)#exit
Ranet-BR2(config)#username Ranet-BR1
Ranet-BR2(config)#
Ranet-BR2#
%SYS-5-CONFIG_I: Configured from console by console
Ranet-BR2#copy run start
Destination filename [startup-config]? 
Building configuration...
[OK]
Ranet-BR2#

[On Host1] :
(Go to Desktop Tab > Command Prompt)

Packet Tracer PC Command Line 1.0
PC>ping 172.20.1.227

Pinging 172.20.1.227 with 32 bytes of data:

Request timed out.
Reply from 172.20.1.227: bytes=32 time=16ms TTL=126
Reply from 172.20.1.227: bytes=32 time=16ms TTL=126
Reply from 172.20.1.227: bytes=32 time=13ms TTL=126

Ping statistics for 172.20.1.227:
    Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
Approximate round trip times in milli-seconds:
    Minimum = 13ms, Maximum = 16ms, Average = 15ms

PC>
كود:
<<Answer for LAB 3-3: Frame Relay-Multipoint>>

[On Ranet  HQ (via console)] :
(Go to Desktop Tab > Terminal)
Ranet-HQ>en
Ranet-HQ#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Ranet-HQ(config)#int fa0/0
Ranet-HQ(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Ranet-HQ(config-if)#ip add 192.168.0.73 255.255.255.248
Ranet-HQ(config-if)#int s0/0/0
Ranet-HQ(config-if)#no sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
Ranet-HQ(config-if)#ip add 10.0.0.1 255.255.255.248
Ranet-HQ(config-if)#encapsulation frame-relay ietf 
Ranet-HQ(config-if)#frame-relay lmi-type ansi
Ranet-HQ(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Ranet-HQ(config-if)#

%SYS-5-CONFIG_I: Configured from console by consoleRanet-HQ#
Ranet-HQ#ping 192.168.0.123

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.123, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 11/12/13 ms

Ranet-HQ#sh frame-relay map
Serial0/0/0 (up): ip 10.0.0.4 dlci 104, dynamic, broadcast, IETF, status defined, active
Serial0/0/0 (up): ip 10.0.0.2 dlci 102, dynamic, broadcast, IETF, status defined, active
Serial0/0/0 (up): ip 10.0.0.3 dlci 103, dynamic, broadcast, IETF, status defined, active
Ranet-HQ#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Ranet-HQ(config)#int s0/0/0
Ranet-HQ(config-if)#sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to administratively down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to down
Ranet-HQ(config-if)#frame-relay map ip 10.0.0.2 102 broadcast 
Ranet-HQ(config-if)#frame-relay map ip 10.0.0.3 103 broadcast 
Ranet-HQ(config-if)#frame-relay map ip 10.0.0.4 104 broadcast 
Ranet-HQ(config-if)#no sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
Ranet-HQ(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Ranet-HQ(config-if)#
Ranet-HQ#
%SYS-5-CONFIG_I: Configured from console by console
Ranet-HQ#sh frame-relay map
Serial0/0/0 (up): ip 10.0.0.2 dlci 102, static, broadcast, IETF, status defined, active
Serial0/0/0 (up): ip 10.0.0.3 dlci 103, static, broadcast, IETF, status defined, active
Serial0/0/0 (up): ip 10.0.0.4 dlci 104, static, broadcast, IETF, status defined, active
Ranet-HQ#ping 192.168.0.123

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.123, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 9/12/15 ms

Ranet-HQ#ping 192.168.0.130

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.130, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 10/12/15 ms

Ranet-HQ#ping 192.168.0.140

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.140, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 11/12/15 ms

Ranet-HQ#copy run start
Destination filename [startup-config]? 
Building configuration...
[OK]
Ranet-HQ#

[On Host1] :
(Go to Desktop Tab > Command Prompt)
Packet Tracer PC Command Line 1.0
PC>ping 192.168.0.123

Pinging 192.168.0.123 with 32 bytes of data:

Reply from 192.168.0.123: bytes=32 time=23ms TTL=126
Reply from 192.168.0.123: bytes=32 time=16ms TTL=126
Reply from 192.168.0.123: bytes=32 time=16ms TTL=126
Reply from 192.168.0.123: bytes=32 time=17ms TTL=126

Ping statistics for 192.168.0.123:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 16ms, Maximum = 23ms, Average = 18ms

PC>ping 192.168.0.130

Pinging 192.168.0.130 with 32 bytes of data:

Reply from 192.168.0.130: bytes=32 time=14ms TTL=126
Reply from 192.168.0.130: bytes=32 time=16ms TTL=126
Reply from 192.168.0.130: bytes=32 time=19ms TTL=126
Reply from 192.168.0.130: bytes=32 time=18ms TTL=126

Ping statistics for 192.168.0.130:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 14ms, Maximum = 19ms, Average = 16ms

PC>ping 192.168.0.140

Pinging 192.168.0.140 with 32 bytes of data:

Reply from 192.168.0.140: bytes=32 time=17ms TTL=126
Reply from 192.168.0.140: bytes=32 time=8ms TTL=126
Reply from 192.168.0.140: bytes=32 time=18ms TTL=126
Reply from 192.168.0.140: bytes=32 time=15ms TTL=126

Ping statistics for 192.168.0.140:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 18ms, Average = 14ms

PC>
كود:
<<Answer for LAB 3-4: Frame Relay-P2P>>

[On Ranet  HQ (via console)] :
(Go to Desktop Tab > Terminal)
Ranet-HQ>en
Ranet-HQ#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Ranet-HQ(config)#int fa0/0
Ranet-HQ(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Ranet-HQ(config-if)#ip add 172.20.8.1 255.255.255.240
Ranet-HQ(config-if)#int s0/0/0
Ranet-HQ(config-if)#no sh

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
Ranet-HQ(config-if)#encapsulation frame-relay 
Ranet-HQ(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Ranet-HQ(config-if)#int s0/0/0.2 point-to-point 

%LINK-5-CHANGED: Interface Serial0/0/0.2, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0.2, changed state to up
Ranet-HQ(config-subif)#frame-relay interface-dlci 902
Ranet-HQ(config-subif)#ip add 10.0.2.1 255.255.255.252
Ranet-HQ(config-if)#int s0/0/0.3 point-to-point 
Ranet-HQ(config-subif)#
%LINK-5-CHANGED: Interface Serial0/0/0.3, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0.3, changed state to up
Ranet-HQ(config-subif)#frame-relay interface-dlci 903
Ranet-HQ(config-subif)#ip add 10.0.3.1 255.255.255.252
Ranet-HQ(config-subif)#int s0/0/0.4 point-to-point

%LINK-5-CHANGED: Interface Serial0/0/0.4, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0.4, changed state to up
Ranet-HQ(config-subif)#frame-relay interface-dlci 904
Ranet-HQ(config-subif)#ip add 10.0.4.1 255.255.255.252
Ranet-HQ(config-subif)#
Ranet-HQ#
%SYS-5-CONFIG_I: Configured from console by console
Ranet-HQ#sh frame-relay map
Serial0/0/0.2 (up): point-to-point dlci, dlci 902, broadcast, status defined, active
Serial0/0/0.3 (up): point-to-point dlci, dlci 903, broadcast, status defined, active
Serial0/0/0.4 (up): point-to-point dlci, dlci 904, broadcast, status defined, active
Ranet-HQ#ping 172.20.8.30

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.20.8.30, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 4/9/12 ms

Ranet-HQ#ping 172.20.8.40

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.20.8.40, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 10/12/16 ms

Ranet-HQ#ping 172.20.8.60

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.20.8.60, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 11/12/13 ms

Ranet-HQ#copy run start
Destination filename [startup-config]? 
Building configuration...
[OK]
Ranet-HQ#

[On Host1] :
(Go to Desktop Tab > Command Prompt)

Packet Tracer PC Command Line 1.0
PC>ping 172.20.8.30

Pinging 172.20.8.30 with 32 bytes of data:

Reply from 172.20.8.30: bytes=32 time=15ms TTL=126
Reply from 172.20.8.30: bytes=32 time=8ms TTL=126
Reply from 172.20.8.30: bytes=32 time=18ms TTL=126
Reply from 172.20.8.30: bytes=32 time=14ms TTL=126

Ping statistics for 172.20.8.30:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 18ms, Average = 13ms

PC>ping 172.20.8.40

Pinging 172.20.8.40 with 32 bytes of data:

Reply from 172.20.8.40: bytes=32 time=16ms TTL=126
Reply from 172.20.8.40: bytes=32 time=15ms TTL=126
Reply from 172.20.8.40: bytes=32 time=16ms TTL=126
Reply from 172.20.8.40: bytes=32 time=14ms TTL=126

Ping statistics for 172.20.8.40:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 14ms, Maximum = 16ms, Average = 15ms

PC>ping 172.20.8.60

Pinging 172.20.8.60 with 32 bytes of data:

Reply from 172.20.8.60: bytes=32 time=13ms TTL=126
Reply from 172.20.8.60: bytes=32 time=17ms TTL=126
Reply from 172.20.8.60: bytes=32 time=17ms TTL=126
Reply from 172.20.8.60: bytes=32 time=10ms TTL=126

Ping statistics for 172.20.8.60:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 10ms, Maximum = 17ms, Average = 14ms

PC>
فريكر غير متواجد حالياً   رد مع اقتباس
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36