عرض مشاركة واحدة
قديم 09-15-2011, 04:00 AM   #1
أحمد مصطفي
:: سيسكو نشيط ::
 
تاريخ التسجيل: Aug 2010
المشاركات: 78
شكراً: 4
تم شكره 83 مرة في 32 مشاركة
أحمد مصطفي will become famous soon enough
افتراضي Multi Point Route Redistribution Lab


بسم الله والحمد لله والصلاة والسلام علي رسول الله وآله وصحبه وإخوانه وسلم
Multi Point Route Redistribution
يوجد العديد من النقاط تم تغطيتها في هذا اللاب علي النحو التالي:
Lab Objectives:
1- Networks 192.168.10.0/30, 192.168.17.0 and 172.20.20.0/30 should not be advertised in OSPF domain.
R1#sho run
router ospf 100
log-adjacency-changes
redistribute rip subnets route-map RIP-TO-OSPF
!
access-list 10 permit 192.168.10.0 0.0.0.3
access-list 10 permit 192.168.17.0 0.0.0.255
access-list 10 permit 172.20.20.0 0.0.0.3
!
route-map RIP-TO-OSPF deny 10
match ip address 10
!
route-map RIP-TO-OSPF permit 20
set metric 5000
set metric-type type-2
R3# the same configuration
R5#sho ip route
Gateway of last resort is not set
C 192.168.30.0/24 is directly connected, Loopback0
172.16.0.0/30 is subnetted, 3 subnets
O 172.16.40.0 [110/129] via 172.16.30.1, 00:12:45, Serial0/0
C 172.16.30.0 is directly connected, Serial0/0
O 172.16.10.0 [110/65] via 172.16.30.1, 00:12:45, Serial0/0
O 192.168.20.0/24 [110/130] via 172.16.30.1, 00:12:45, Serial0/0
10.0.0.0/30 is subnetted, 1 subnets
O E2 10.10.10.0 [110/5000] via 172.16.30.1, 00:07:19, Serial0/0
O E2 192.168.16.0/24 [110/5000] via 172.16.30.1, 00:07:19, Serial0/0
O E2 192.168.18.0/24 [110/5000] via 172.16.30.1, 00:07:19, Serial0/0
R6#sho ip route
Gateway of last resort is not set
O 192.168.30.0/24 [110/130] via 172.16.40.1, 00:08:12, Serial0/1
172.16.0.0/30 is subnetted, 3 subnets
C 172.16.40.0 is directly connected, Serial0/1
O 172.16.30.0 [110/129] via 172.16.40.1, 00:08:12, Serial0/1
O 172.16.10.0 [110/65] via 172.16.40.1, 00:08:12, Serial0/1
C 192.168.20.0/24 is directly connected, Loopback0
10.0.0.0/30 is subnetted, 1 subnets
O E2 10.10.10.0 [110/5000] via 172.16.40.1, 00:02:46, Serial0/1
O E2 192.168.16.0/24 [110/5000] via 172.16.40.1, 00:02:46, Serial0/1
O E2 192.168.18.0/24 [110/5000] via 172.16.40.1, 00:02:46, Serial0/1
2- R3 should use RIP to reach 10.10.10.0/30, no route-maps, distribute-lists or prefix-lists should be used.
R3(config)#router ospf 100
R3(config-router)#distance ospf external 100 inter-area 100 intra-area 100
R3(config-router)#distance 100 10.10.10.0 0.0.0.3
R3(config-router)#do sho ip route
10.0.0.0/30 is subnetted, 1 subnets
R 10.10.10.0 [120/1] via 172.20.20.1, 00:00:11, Serial1/0
3- 192.168.16.0/24 should be advertised in ospf with metric of 200 and metric type of 1.
R1#sho run
!
access-list 10 permit 192.168.10.0 0.0.0.3
access-list 10 permit 192.168.17.0 0.0.0.255
access-list 10 permit 172.20.20.0 0.0.0.3
access-list 20 permit 192.168.16.0 0.0.0.255
!
route-map RIP-TO-OSPF deny 10
match ip address 10
!
route-map RIP-TO-OSPF permit 15
match ip address 20
set metric 200
set metric-type type-1
!
route-map RIP-TO-OSPF permit 20
set metric 5000
set metric-type type-2
R3# the same configuration
R3#sho ip route
O E1 192.168.16.0/24 [100/201] via 172.16.10.1, 00:04:18, FastEthernet0/0
R5#sho ip route
O E1 192.168.16.0/24 [110/264] via 172.16.30.1, 00:04:21, Serial0/0
R6#sho ip route
O E1 192.168.16.0/24 [110/265] via 172.16.40.1, 00:03:55, Serial0/1
4- Any other route redistributed in ospf should be redistributed with a metric of 5000 and type 2.
Included in question 2
5- Without redistributing ospf routes back into RIP, RIP domain routers should be able to reach any network in the ospf domain.
R1#sho run | sec rip
redistribute rip subnets route-map RIP-TO-OSPF
router rip
version 2
passive-interface FastEthernet1/0
network 192.168.10.0
default-information originate
R3#sho run | sec rip
redistribute rip subnets route-map RIP-TO-OSPF
router rip
version 2
passive-interface FastEthernet0/0
network 172.20.0.0
default-information originate
no auto-summary
R2#sho ip route
R* 0.0.0.0/0 [120/1] via 192.168.10.1, 00:00:20, FastEthernet0/0
R4#sho ip route
R* 0.0.0.0/0 [120/1] via 172.20.20.2, 00:00:25, Serial1/0
لتحميل اللاب
الموضوع الأصلى من هنا: منتديات سيسكو التعليمية | كن بين الخبراء ! http://www.ciscovb.com/vb/t3943.html#post23470


بسم الله

لتحميل الخطوات السابقة

بسم الله .docx
بسم الله .pdf


ولا تنسوني والمسلمين من صالح الدعاء
وصلي الله وسلم وبارك علي المصطفي وآله وصحبه وإخوانه وسلم



Multi Point Route Redistribution Lab multi point redistribution route


التعديل الأخير تم بواسطة أحمد مصطفي ; 09-15-2011 الساعة 04:19 PM
أحمد مصطفي غير متواجد حالياً   رد مع اقتباس
الأعضاء الذين قالوا شكراً لـ أحمد مصطفي على المشاركة المفيدة:
saidyy79 (12-23-2011)
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36