عرض مشاركة واحدة
قديم 01-08-2011, 10:44 PM   #1
على بن سيف
:: عضو شرف منتدى سيسكو ::
 
الصورة الرمزية على بن سيف
 
تاريخ التسجيل: Mar 2010
المشاركات: 511
شكراً: 33
تم شكره 151 مرة في 86 مشاركة
على بن سيف is just really niceعلى بن سيف is just really niceعلى بن سيف is just really niceعلى بن سيف is just really niceعلى بن سيف is just really nice
Thumbs up اعدادات: Point-to-Point Links using PPP or HDLC


تطبيق بسيط بين رواترين بستخدم التغليف PPP or HDLC
Configuring Point-to-Point links using PPP or HDLC

HDLC :High-Level Data Link Control protocol
PPP :Point to Point Protocol

اعدادات: Point-to-Point Links using HDLC
R1 con0 is now available
Press RETURN to get started.
R1>enable
R1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#interface Serial1/1
R1(config-if)#encapsulation hdlc
R1(config-if)#no shutdown
R1(config-if)#end
R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#
%LINK-3-UPDOWN: Interface Serial1/1, changed state to up
R1#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1,
changed state to up
R1#


**********
R2 con0 is now available
Press RETURN to get started.
R2>enable
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#interface Serial1/1
R2(config-if)#encapsulation hdlc
R2(config-if)#no shutdown
R2(config-if)#end
R2#
%SYS-5-CONFIG_I: Configured from console by console
R2#
%LINK-3-UPDOWN: Interface Serial1/1, changed state to up
R2#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1,
changed state to up
R2#



R1#show interface Serial1/1

Serial1/1 is up, line protocol is down
Hardware is M4T
MTU 1500 bytes, BW 1544 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, crc 16, loopback not set
Keepalive set (10 sec)
Restart-Delay is 0 secs
Last input never, output 00:00:07, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
الموضوع الأصلى من هنا: منتديات سيسكو التعليمية | كن بين الخبراء ! http://www.ciscovb.com/vb/t2448.html#post16841
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
38 packets output, 2332 bytes, 0 underruns
0 output errors, 0 collisions, 4 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
5 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up
R1#


** ادا اردنا استخدام PPP فقط نغير encapsulation hdlc الى encapsulation ppp



hu]h]hj: Point-to-Point Links using PPP or HDLC hdlc links

على بن سيف غير متواجد حالياً   رد مع اقتباس
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36